Tag: Band theory of solids

  • 2.15 Semiconductor Devices in SPICE

    The SPICE (Simulation Program, Integrated Circuit Emphesis) electronic simulation program provides circuit elements and models for semiconductors. The SPICE element names begin with d, q, j, or m correspond to diode, BJT, JFET and MOSFET elements, respectively. These elements are accompanied by corresponding “models” These models have extensive lists of parameters describing the device. Though, we do…

  • 2.14 Quantum Devices

    Most integrated circuits are digital, based on MOS (CMOS) transistors. Every couple of years since the late 1960’s a geometry shrink has taken place, increasing the circuit density– more circuitry at a lower cost in the same space. As of this writing (2006), the MOS transistor gate length is 65-nm for leading-edge production, with 45-nm…

  • 2.13 Superconducting Devices

    Superconducting devices, though not widely used, have some unique characteristics not available in standard semiconductor devices. High sensitivity with respect to amplification of electrical signals, detection of magnetic fields, and detection of light are prized applications. High-speed switching is also possible, though not applied to computers at this time. Conventional superconducting devices must be cooled…

  • 2.12 Semiconductor Manufacturing Techniques

    The manufacture of only silicon based semiconductors is described in this section; most semiconductors are silicon. Silicon is particularly suitable for integrated circuits because it readily forms an oxide coating, useful in patterning integrated components like transistors. Silicon Silicon is the second most common element in the Earth’s crust in the form of silicon dioxide, SiO2, otherwise…

  • 2.11 Thyristors

    Thyristors are a broad classification of bipolar-conducting semiconductor devices having four (or more) alternating N-P-N-P layers. Thyristors include: silicon controlled rectifier (SCR), TRIAC, gate turn off switch (GTO), silicon controlled switch (SCS), AC diode (DIAC), unijunction transistor (UJT), programmable unijunction transistor (PUT). Only the SCR is examined in this section; though the GTO is mentioned. Shockley proposed the four-layer…

  • 2.10 Insulated-gate Field-effect Transistors (MOSFET)

    The Insulated-Gate Field-Effect Transistor (IGFET), also known as the Metal Oxide Field Effect Transistor (MOSFET), is a derivative of the field effect transistor (FET). Today, most transistors are of the MOSFET type as components of digital integrated circuits. Though discrete BJT’s are more numerous than discrete MOSFET’s. The MOSFET transistor count within an integrated circuit may…

  • 2.9 Junction Field-effect Transistors

    The field effect transistor was proposed by Julius Lilienfeld in US patents in 1926 and 1933 (1,900,018). Moreover, Shockley, Brattain, and Bardeen were investigating the field effect transistor in 1947. Though, the extreme difficulties sidetracked them into inventing the bipolar transistor instead. Shockley’s field effect transistor theory was published in 1952. However, the materials processing…

  • 2.8 Bipolar Junction Transistors

    The bipolar junction transistor (BJT) was named because its operation involves conduction by two carriers: electrons and holes in the same crystal. The first bipolar transistor was invented at Bell Labs by William Shockley, Walter Brattain, and John Bardeen so late in 1947 that it was not published until 1948. Thus, many texts differ as…

  • 2.7 Junction Diodes

    There was some historic crude, but usable were some historic crude, but usable semiconductor rectifiers before high purity materials were available. Ferdinand Braun invented a lead sulfide, PbS, based point contact rectifier in 1874. Cuprous oxide rectifiers were used as power rectifiers in 1924. The forward voltage drop is 0.2 V. The linear characteristic curve perhaps…

  • 2.6 The P-N Junction

    If a block of P-type semiconductor is placed in contact with a block of N-type semiconductor in Figure below(a), the result is of no value. We have two conductive blocks in contact with each other, showing no unique properties. The problem is two separate and distinct crystal bodies. The number of electrons is balanced by…

  • 2.5 Electrons and holes

    Pure semiconductors are relatively good insulators as compared with metals, though not nearly as good as a true insulator like glass. To be useful in semiconductor applications, the intrinsic semiconductor (pure undoped semiconductor) must have no more than one impurity atom in 10 billion semiconductor atoms. This is analogous to a grain of salt impurity…

  • 2.4 Band Theory of Solids

    Quantum physics describes the states of electrons in an atom according to the four-fold scheme of quantum numbers. The quantum numbers describe the allowable states electrons may assume in an atom. To use the analogy of an amphitheater, quantum numbers describe how many rows and seats are available. Individual electrons may be described by the…

  • 2.3 Valence and Crystal Structure

    Valence: The electrons in the outermost shell, or valence shell, are known as valence electrons. These valence electrons are responsible for the chemical properties of the chemical elements. It is these electrons which participate in chemical reactions with other elements. An oversimplified chemistry rule applicable to simple reactions is that atoms try to form a…

  • 2.2 Quantum Physics

    “I think it is safe to say that no one understands quantum mechanics.” —Physicist Richard P. Feynman To say that the invention of semiconductor devices was a revolution would not be an exaggeration. Not only was this an impressive technological accomplishment, but it paved the way for developments that would indelibly alter modern society. Semiconductor…

  • 2.1 Introduction to Solid-state Device Theory

    This chapter will cover the physics behind the operation of semiconductor devices and show how these principles are applied in several different types of semiconductor devices. Subsequent chapters will deal primarily with the practical aspects of these devices in circuits and omit theory as much as possible. Back to Main Index of Book